How to Install OpenVPN on CentOS 7 or 8

November 19, 2020


A Virtual Private Network (VPN) encrypts all network traffic, masking the users and protecting them from untrusted networks. It can provide a secure connection to a company network, bypass geo-restrictions, and allow you to surf the web using public Wi-Fi networks while keeping your data private.

OpenVPN is a fully-featured, open-source Secure Socket Layer (SSL) VPN solution.

In this tutorial, you will learn how to set up OpenVPN on a CentOS 7 server and connect to OpenVPN from a client machine.

How to install OpenVPN on CentOS 7.


  • A CentOS 7 or CentOS 8 server
  • A user account with root (sudo) access
  • Access to the command line/terminal window
  • A domain or subdomain that resolves to your server
  • A client machine from which you will connect to the OpenVPN server

Step 1: Install OpenVPN

1. Update the CentOS repositories and packages by running:

yum update -y

2. You cannot download the OpenVPN package from the default CentOS repositories. However, OpenVPN is available in the Extra Packages for Enterprise Linux (EPEL) repository. To enable the EPEL repository, run the command:

yum install epel-release -y
Install EPEL repository on CentOS 7.

3. Update the repositories again:

yum update -y

4. You can now install OpenVPN with the command:

yum install -y openvpn
Install OpenVPN on CentOS 7.

Step 2: Install Easy RSA

The next step is to build a Public Key Infrastructure (PKI). To do this, you need to install easy RSA, a CLI utility for creating and managing a PKI Certificate Authority (CA).

Easy RSA helps you set up an internal certificate authority (CA) and generate SSL key pairs to secure the VPN connections.

1. To download the easy RSA package, use the <strong>wget</strong> command. If you don’t have wget on your CenOS system, install it by running:

yum install -y wget

2. At the time of writing, the latest version of the CLI utility is 3.0.8, which we will download. To use another version, check out easy RSA’s release page on GitHub.

Download EasyRSA on CentoOS 7.

3. Next, extract the downloaded archive:

tar -xf v3.0.8.tar.gz

4. Create and move into a new openvpn directory:

cd /etc/openvpn/

5. Then, create a subdirectory <strong>easy-rsa</strong> under the path <strong>/etc/openvpn</strong>:

mkdir /etc/openvpn/easy-rsa

6. Move the extracted directory into /etc/openvpn/easy-rsa:

mv /root/easy-rsa-3.0.8 /etc/openvpn/easy-rsa

To check whether you have successfully moved everything from the easy-rsa-3.0.8 directory, move into easy-rsa with <strong>cd /etc/openvpn/easy-rsa</strong> and list the content with <strong>ls</strong>. You should see a list of files and folders, as in the image below.

Move Easy RSA directory into the openvpn folder.

Step 3: Configure OpenVPN

Once you have installed OpenVPN and Easy RSA, you can move on to configuring the OpenVPN server.

The instructions in this section help you set up the basic configuration. You can alter it according to your needs.

Before running any of the commands, make sure to return to the root directory. To do so, type <strong>cd</strong> in the terminal window and hit Enter.

1. The first step is to copy the sample server.conf file from OpenVPN’s documentation directory:

cp /usr/share/doc/openvpn-2.4.9/sample/sample-config-files/server.conf /etc/openvpn

If you cannot find the OpenVPN sample configuration file, search for its location using the <strong>find</strong> command:

find / -name server.conf

2. Then, open the copied configuration file with a text editor of your choice:

vi etc/openvpn/server.conf

The command opens the sample OpenVPN config file. The comments in the file begin with a hashtag # or a semicolon ;.

The server configuration file for OpenVPN.

3. To set up the basic configuration, you need to uncomment the following lines by removing the semicolons.

  • <strong>topology subnet</strong> (makes the OpenVPN installation function as a subnetwork)
  • <strong>push "redirect-gateway def1 bypass-dhcp"</strong> (instructs the client to redirect traffic through the OpenVPN server)
  • <strong>push "dhcp-option DNS"</strong> (uses an OpenDNS resolver to connect to OpenVPN)
  • <strong>push "dhcp-option DNS"</strong> (uses an OpenDNS resolver to connect to OpenVPN)
  • <strong>user nobody</strong> (runs OpenVPN with no privileges)
  • <strong>group nobody</strong> (runs OpenVPN with no privileges)

4. Then, generate a static encryption key to enable TLS authentication. To do that, locate the line <strong>tls-auth ta.key 0</strong> and comment it by adding ; in front of it. Then, add a new line under it:

tls-crypt myvpn.tlsauth
Enable TLS authentication for OpenVPN.

Note: The configuration file specifies which DNS servers to use to connect to OpenVPN. By default, it is set to use OpenDNS resolvers, which is how we left it. Alternatively, you can change it to different DNS resolvers by modifying the push "dhcp-option DNS" and push "dhcp-option DNS" lines.

5. Save and exit the configuration file.

6. Finally, generate the static encryption key specified in the file with the command:

openvpn --genkey --secret /etc/openvpn/myvpn.tlsauth

Step 4: Generate Keys and Certificates

1. Create a vars configuration file using vars.example stored in the /easy-rsa/easyrsa3 directory. Move into the mentioned directory with:

cd /etc/openvpn/easy-rsa/easyrsa3

2. You can list the contents using the <strong>ls</strong> command to check whether you have the vars.example file.

Find vars.example file for EasyRSA.

3. Copy the sample file vars.example under the name vars:

cp vars.example vars

If you list the files in the directory again, you should have a separate vars file that you can use to configure Easy RSA.

Copy the vars file from the sample vars file.

4. Open the vars file in a text editor of your choice:

vi vars

5. Scroll through the file and find the lines listed below.

#set_var EASYRSA_REQ_PROVINCE "California"
#set_var EASYRSA_REQ_CITY "San Francisco"
#set_var EASYRSA_REQ_ORG "Copyleft Certificate Co"
#set_var EASYRSA_REQ_OU "My Organizational Unit"

6. Uncomment the lines by removing # and replace the default values with your information.

7. Then, find the line specifying the KEY_NAME and change it to "server":

export KEY_NAME="server"

8. Finally, change KEY_CN to the domain or subdomain that resolves to your server.


9. Save and close the file.

10. Clean up any previous keys and generate the certificate authority:

./easyrsa clean-all
Generate certificate authority.

11. Now, you can move on to building the certificate authority with the build-ca script. Run the command:

./easyrsa build-ca

You will be asked to set a CA Key Passphrase and a common name for your CA.

Build certificate authority for OpenVPN with Easy RSA.

Note: To skip password authentication each time you sign your certificates, you can use the ./easyrsa build-ca nopass command.

12. Create a key and certificate for the server:

./easyrsa build-server-full server
Create a key and certificate for OpenVPN.

13. Next, generate a Diffie-Hellman key exchange file by running:

./easyrsa gen-dh
Generating a Diffie-Hellman key exchange file.

14. You also need a certificate for each client. Generate them on the server and then copy them on the client machine.

With the following command, we create a certificate and key for client1. You can modify the command by using a name of your choice.

./easyrsa build-client-full client1
Generate certificate and keys for client.

15. Once you have generated the keys and certificates, copy them from pki into the openvpn directory. To do so, navigate to the pki directory by running:

cd /etc/openvpn/easy-rsa/easyrsa3/pki

You need to copy four files in total:

  • ca.crt
  • dh.pem
  • ca.key
  • server.key

The first two files (ca.crt and dh.pem) are stored in the pki directory, while ca.key and server.key are in a subdirectory pki/private.

Server keys and certificates for OpenVPN.

Therefore, copy ca.crt and dh.pem into the openvpn directory first:

cp ca.crt dh.pem /etc/openvpn

Then, move into the subdirectory private, and copy ca.key and server.key by running:

cd private
cp ca.key server.key/etc/openvpn

Step 5: Firewall and Routing Configuration

Set Firewall Rules

1. Start by checking your active firewalld zone:

firewall-cmd --get-active-zones

The output will show your firewalld zone. In the example below, it is public.

Check firewalld zone.

2. Add the openvpn service to the list of services firewalld allows within the active zone. The active zone in our example is public. If your active zone is trusted, modify the command accordingly.

firewall-cmd --zone=public --add-service openvpn

3. Next, make the settings above permanent by running the command:

firewall-cmd --zone=public --add-service openvpn --permanent

4. To check whether the openvpn service was added use:

firewall-cmd --list-services --zone=public
Check firewalld services.

5. Then, add a masquerade to the runtime instance:

firewall-cmd --add-masquerade

6. And make it permanent:

firewall-cmd --add-masquerade --permanent

7. Verify the masquerade was added by running:

firewall-cmd --query-masquerade

The output should respond with yes.

Check the masquerade was added to the runtime instance.

Routing the Configuration

Once you have completed the steps above, move on to routing to your OpenVPN subnet.

1. Create a variable that represents the primary network interface used by your server. In the command below, the variable is named VAR. However, you can create a variable under the name of your choice.

VAR=$(ip route get | awk 'NR==1 {print $(NF-2)}')

2. Next, permanently add the routing rule using the variable created above:

firewall-cmd --permanent --direct --passthrough ipv4 -t nat -A POSTROUTING -s -o $VAR -j MASQUERADE

3. Reload firewalld for the changes to take place:

firewall-cmd --reload

4. Move on to routing all web traffic from the client to the server’s IP address by enabling IP forwarding. Open the sysctl.conf file:

vi /etc/sysctl.conf

5. Add the following line at the top of the file:

net.ipv4.ip_forward = 1

6. Finally, restart the service:

systemctl restart network.service

Step 6: Start OpenVPN

1. To start the OpenVPN service, run the command:

systemctl -f start openvpn@server.service

2. Then, enable it to start up at boot by running:

systemctl -f enable openvpn@server.service

3. Verify the service is active with:

systemctl status openvpn@server.service

The output should respond that the OpenVPN service for the server is active (running).

Step 7: Configure a OpenVPN Client

With everything set up on the OpenVPN server, you can configure your client machine and connect it to the server.

As mentioned in Step 4, each client machine needs to have local copies of the CA certificate, client key, SSL certificate, and the encryption key.

1. Find and copy the following files from the server to the client machine:

  • /etc/openvpn/easy-rsa/easyrsa3/pki/ca.crt
  • /etc/openvpn/easy-rsa/easyrsa3/pki/client.crt
  • /etc/openvpn/easy-rsa/easyrsa3/pki/private/client.key
  • /etc/openvpn/myvpn.tlsauth

2. Then, create a configuration file for the OpenVPN client under the name client.ovpn on the client machine:

vi client.ovpn

3. Add the following content to the file:

ca <strong>/path/to/</strong>ca.crt
cert <strong>/path/to/</strong>client.crt
key <strong>/path/to/</strong>client.key
tls-crypt <strong>/path/to/myvpn</strong>.tlsauth
remote-cert-eku "TLS Web Client Authentication"
proto udp
remote <strong>your_server_ip</strong> 1194 udp
dev tun
topology subnet
user nobody
group nobody

Make sure to replace the bolded parts with your respected values.

OpenVPN client configuration file.

4. Save and close the file.

Step 8: Connect a Client to OpenVPN

The instructions on how to connect to OpenVPN differ depending on your client machine’s operating system.

For Linux Users

To connect to OpenVPN, run the command:

openvpn --config /path/to/client.ovpn

For Windows Users

1. First, copy the client.ovpn configuration file in the C:Program FilesOpenVPNconfig directory.

2. Download and install the OpenVPN application. You can find the latest build on the OpenVPN Community Downloads page. Once you have installed the application, launch OpenVPN.

3. Right-click the OpenVPN system tray icon and select Connect. To perform this task, you need administrative privileges.

For macOS Users

You can connect to OpenVPN from a macOS system using Tunnelblick (an open-source graphic user interface for OpenVPN on OS X and macOS).

Before launching Tunnelblick, make sure to store the client.ovpn configuration file in the ~/Library/Application Support/Tunnelblick/Configurations directory.


After reading this article, you should have successfully set up and configured OpenVPN on a CentOS server. Additionally, you should have learned how to access the OpenVPN server from a Linux, Windows, or macOS client machine.

Was this article helpful?
Sofija Simic
Sofija Simic is an aspiring Technical Writer at phoenixNAP. Alongside her educational background in teaching and writing, she has had a lifelong passion for information technology. She is committed to unscrambling confusing IT concepts and streamlining intricate software installations.
Next you should read
CentOS 6 End of Life in November 2020
September 4, 2020

CentOS 6 EOL is coming up on November 2020. This Linux distribution will no longer be supported with updates...
Read more
How to Configure CentOS Network Settings
March 25, 2020

Configure CentOS network settings using the command line or the Network Manager TUI. This guide shows you how to...
Read more
How to Install and Use Nmap Network Scanner on Linux
September 15, 2019

Learn how to install NMAP on a Linux based system and use it to retrieve valuable information from remote systems.
Read more
21 Server Security Tips to Secure Your Server
April 20, 2019

Hackers are always on the lookout for server vulnerabilities. Minimize risks and be confident your data is safe...
Read more
  • © 2021 Copyright phoenixNAP | Global IT Services. All Rights Reserved.